A Practical Use of Vertical Seismic Profiles-Stratigraphic Calibration of 3-D Seismic Data. Digital Download

GC9704D. A Practical Use of Vertical Seismic Profiles--Stratigraphic Calibration of 3-D Seismic Data, by B. A. Hardage. 11 p., 5 figs., 1997. ISSN: 2475-3637. doi.org/10.23867/gc9704D. Downloadable PDF.


To purchase this publication in book format, please order GC9704.

ABSTRACT
Seismic interpreters must have a reliable methodology that allows them to (1) correlate seismic reflection events with well-log-defined sequence boundaries and (2) specify which seismic facies windows correspond to the rock facies intervals defined by well control. The need to define where critical stratigraphic features are correctly positioned in surface-recorded seismic reflection data is becoming increasingly important now that three-dimensional (3-D) seismic data are being widely used to evaluate oil and gas properties, particularly properties that are dominated by thin-bed reservoirs. The fundamental problem that confronts 3-D seismic interpreters is as old as seismic interpretation itself and can be stated as, How do you establish a rigorous correspondence between stratigraphic depth and seismic traveltime? Or perhaps even more to the point, How do you define the seismic data window that exactly spans a targeted thin bed when the position of that thin bed is known only as a function of depth from wireline measurements?

Traditionally, seismic interpreters have used locally reliable velocity functions (usually nearby velocity check-shot data) or synthetic seismograms, or both, to answer these fundamental interpretation questions. However, vertical seismic profiling (VSP) is a more rigorous methodology that interpreters can use to calibrate subsurface stratigraphy to seismic reflection data. The objective of this circular is to illustrate how VSP data can provide invaluable support to 3-D seismic interpretation. Specifically, the objective is to show that VSP data usually allow a more reliable depth-to-time calibration than do velocity check shots or synthetic seismograms. The important thin-bed calibration that VSP data provide to 3-D interpreters must be balanced by the fact that the acquisition of VSP data imposes an additional cost on the seismic evaluation of a prospect. That incremental cost needs to be justified, on a case-by-case basis, by comparing the added geological insights and the increased interpretational accuracy that may accrue when VSP data are used in a 3-D seismic interpretation.

CONTENTS
Abstract

Introduction

Information available from VSP data, velocity check shots, and synthetic seismograms

Distinctions between 3-D seismic image time and VSP image time

Enhancing the ability to correlate reflection waveshapes in 3-D seismic and VSP images

Welding stratigraphy to the VSP image

Inserting stratigraphy into 3-D seismic data volumes

Cost considerations

Conclusions

Acknowledgments

References

Figures

1. Source-receiver geometry involved in vertical seismic profiling

2. Example of a synthetic seismogram failure as a stratigraphic calibration tool and of a VSP success

3. Fundamental stratigraphic calibration information provided by VSP data

4. Concept of VSP depth-to-time calibration

5. VSP-based calibration of thin-bed stratigraphy in 3-D seismic images

Keywords: seismic reflection data, stratigraphic calibration, VSP data

CONTENTS

Abstract

Introduction

Information available from VSP data, velocity check shots, and synthetic seismograms

Distinctions between 3-D seismic image time and VSP image time

Enhancing the ability to correlate reflection waveshapes in 3-D seismic and VSP images

Welding stratigraphy to the VSP image

Inserting stratigraphy into 3-D seismic data volumes

Cost considerations

Conclusions

Acknowledgments

References

Figures

1. Source-receiver geometry involved in vertical seismic profiling

2. Example of a synthetic seismogram failure as a stratigraphic calibration tool and of a VSP success

3. Fundamental stratigraphic calibration information provided by VSP data

4. Concept of VSP depth-to-time calibration

5. VSP-based calibration of thin-bed stratigraphy in 3-D seismic images


Citation
Hardage, B. A., 1997, A Practical Use of Vertical Seismic Profiles--Stratigraphic Calibration of 3-D Seismic Data: The University of Texas at Austin, Bureau of Economic Geology, Geological Circular 97-4, 11 p. doi.org/10.23867/gc9704D.